Accessories

Domestic Water Preheater

Acting as a domestic water pre-heater, the brazed plate heat exchanger kit is an easy and economical way to use your outside furnace to save on your domestic water heating bills. The more hot water you use, the more you get! This design is especially helpful for water heaters located in very tight spaces- places where the side-arm heat exchanger wont fit.

1 - 12" 3/4 x 3/4 FIP Flex Connector
1 - 18" 3/4 x 3/4 FIP Flex Connector
1 - 3/4" x 2" Brs Nipple
1 - 3/4" Push 'N Go Male Coupling
2 - 1" Swivel x 1" Barb Adaptor
6 - 1" PEX Crimp Ring
2 - 1" PEX Barb 90 Ell

$299.00

Back to Top

MAXX-R Underground Pipe Insulation System

The flexible and economical MAXX-R Pipe Insulation System is a revolution in underground pipe insulation for wood burning outdoor boilers and furnaces. Until now dealers, contractors and homeowners have had to choose between cheap, poorly designed “home-made” insulation and expensive, hard-to-handle, metric sized, prefabricated pipe-in-pipe systems. MAXX-R, a system that gives you the performance you need, the price you can afford... And it's easy to install!

Call for Pricing: 1-866-966-3432
www.maxx-r.com

Back to Top

Simple Radiant - In Floor Radiant Heating Systems

SIMPLE RADIANT is a revolution in in-floor hydronic radiant heating for both in-slab and between joist (staple-up) installations. We sell directly to do-it-yourselfers and building contractors who want to save money and time - while benefiting from the comfort of in-floor hydronic radiant heat.

Call for Pricing: 1-866-225-8015
www.simpleradiant.com

Back to Top

Summer Heat By-Pass Package

For those of you who want to burn throughout the year to heat your domestic hot water, this is a must. The design allows you to bypass the duct coil in the summer.

3 - 1" Brs FP Thrd Ball Valve
2 - 1 x 3 Brass Nipple
2 - 1" x Close Brass Nipple
4 - PEX Barb x 1" MPT Adapter
2 - 1" Brass Tee
4 - Copper Strut Clamp w/hardware
8 - 1 5/8 x 1 5/8 x 10 14 Green H/Slot Strut
1 - Fabricated Crossover Base

$149.00

Back to Top

Remote Pump Package

Usually, we pre-mount the circulating pump on the furnace. But occasionally, design conditions call for the pump to be mounted remote from the furnace - usually at the lowest point of the system.

1 - Remote Pump Ball Valve/Drain Assy
1 - TACO 007 Circulator Pump
1 - Set of 1" Ductile Flanges for TACO Pumps
1 - 8' Electric Cord & Plug
1 - Fabricated Pump Base

$389.00

Back to Top

Air Removal Kit

This little package allows you to use your home's water supply to purge the hydronic system of air. Our experience has been that this is well worth the money.

1 - 3/4" x 3/4" Hose Swivel Adapter
2 - Rubber Washer
1 - 3/4" Bronze Boiler Drain
1 - 1" x 1" x 3/4" Threaded Brass Tee
2 - 1" PEX x 1" Male Adapter fittings
2 - 1" PEX Crimp Rings
1 - Labor to assemble and test

$39.00

Back to Top

Air Handler Package

This hydronic air handler is an attractive stand-alone appliance designed to connect to new ductwork or an optional filter box and directional hood.

Sizes and prices vary from $1,050 - $1,550

Back to Top

Unit Heater Package

This hydronic unit heater is great for localized areas with no dust. This unit heater is designed to hang from the ceiling on threaded rod. Simple installation.

Sizes and prices vary from $795 - $1,390

Back to Top

Duct Coil Support Package

Designed specifically for down-draft type furnaces in manufactured homes where space is limited. This kit is added to a duct coil (not included) and allows you to set the down-draft furnace cabinet on the coil.

$99.00

Back to Top

Pool Heater Package (With or Without Deck Box)

This Pool Heater Kit is designed for pools with surface area at or under 770 sq. ft. (18' x 30' for example) assuming that you want to keep the water temperature between 80F and 82F. (We can heat larger pools too - just ask.)

Pool heater kits are designed and packaged for fast installation and high capacity performance. Can be winterized and/or disconnected and removed when not in use.

The kit contains a stainless steel shell and tube heat exchanger, aquastat, 3-way diverter valve, 1-1/2" PVC ball valves (and additional components) mounted in an attractive deck box or on an easy to mount board.

(Important Note: Most heat loss is from evaporation, so always use a pool blanket for best results.)

770 Sq. Ft. Pool With Deck Box $2,897.00

Back to Top

Without Deck Box $2,397.00

Super Saver Manual Pool Heating Package

Extend your pool season with our 180,000 BTU manually controlled pool heater. This heater is easy to install, easy to operate, complete winterization kit available. Some of our customers heat their pool all year.

$999

Back to Top

Stainless Steel Chimney Cap

This chimney cap is designed to keep rain water out of the firebox (water and ashes can get messy.) This is great for windy installations too.

Call for Pricing: 1-866-966-3432

4ft Stainless Steel Chimney Extension

Call for Pricing: 1-866-966-3432

Back to Top